The progress printer was buggy where it would not print correctly
and some of the truncation logic was faulty.
The progress printer now prints something like:
go1.21.3.linux-amd64.tar.gz 21.53MiB 13.83MiB/s 33.88% ETA 00:00:03
where it shows
* the number of bytes transferred so far
* the rate of bytes transferred
(using a 1-second half-life for an exponentially weighted average)
* the progress made as a percentage
* the estimated time
(as calculated from the rate of bytes transferred)
Other changes:
* It now correctly prints the progress for very small files
* It prints at a faster rate (4Hz instead of 1Hz)
* It uses IEC units for byte quantities
(to avoid ambiguities of "kb" being kilobits or kilobytes)
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.
Fixes#9756
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is only relevant for unstable releases and local builds. When local
version is newer than upstream, abort release.
Also, re-add missing newlines in output that were missed in
https://github.com/tailscale/tailscale/pull/9694.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
In order for the installer to restart the GUI correctly post-upgrade, we
need the GUI to be able to register its restart preferences.
This PR adds API support for doing so. I'm adding it to OSS so that it
is available should we need to do any such registrations on OSS binaries
in the future.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Adds csrf protection and hooks up an initial POST request from
the React web client.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This removes the unsafe/linkname and only uses the standard library.
It's a bit slower, for now, but https://go.dev/cl/518336 should get us
back.
On darwin/arm64, without https://go.dev/cl/518336
pkg: tailscale.com/tstime/mono
│ before │ after │
│ sec/op │ sec/op vs base │
MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10)
TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10)
geomean 25.28n 27.89n +10.33%
And with it,
MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10)
TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10)
geomean 25.42n 25.52n +0.41%
Updates #8839
Updates tailscale/go#70
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Extract the self-update logic from cmd/tailscale/cli into a standalone
package that could be used from tailscaled later.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
move the tailscale web client out of the cmd/tailscale/cli package, into
a new client/web package. The remaining cli/web.go file is still
responsible for parsing CLI flags and such, and then calls into
client/web. This will allow the web client to be hooked into from other
contexts (for example, from a tsnet server), and provide a dedicated
space to add more functionality to this client.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Refactor two shared functions used by the tailscale cli,
calcAdvertiseRoutes and licensesURL. These are used by the web client as
well as other tailscale subcommands. The web client is being moved out
of the cli package, so move these two functions to new locations.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Previously, tailscale upgrade was doing the bare minimum for checking
authenticode signatures via `WinVerifyTrustEx`. This is fine, but we can do
better:
* WinVerifyTrustEx verifies that the binary's signature is valid, but it doesn't
determine *whose* signature is valid; tailscale upgrade should also ensure that
the binary is actually signed *by us*.
* I added the ability to check the signatures of MSI files.
* In future PRs I will be adding diagnostic logging that lists details about
every module (ie, DLL) loaded into our process. As part of that metadata, I
want to be able to extract information about who signed the binaries.
This code is modelled on some C++ I wrote for Firefox back in the day. See
https://searchfox.org/mozilla-central/rev/27e4816536c891d85d63695025f2549fd7976392/toolkit/xre/dllservices/mozglue/Authenticode.cpp
for reference.
Fixes#8284
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The util/linuxfw/iptables.go had a bunch of code that wasn't yet used
(in prep for future work) but because of its imports, ended up
initializing code deep within gvisor that panicked on init on arm64
systems not using 4KB pages.
This deletes the unused code to delete the imports and remove the
panic. We can then cherry-pick this back to the branch and restore it
later in a different way.
A new test makes sure we don't regress in the future by depending on
the panicking package in question.
Fixes#8658
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When performing a fallback DNS query, run the recursive resolver in a
separate goroutine and compare the results returned by the recursive
resolver with the results we get from "regular" bootstrap DNS. This will
allow us to gather data about whether the recursive DNS resolver works
better, worse, or about the same as "regular" bootstrap DNS.
Updates #5853
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ifa0b0cc9eeb0dccd6f7a3d91675fe44b3b34bd48
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This holds back gvisor, kubernetes, goreleaser, and esbuild, which all
had breaking API changes.
Updates #8043
Updates #7381
Updates #8042 (updates u-root which adds deps)
Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change adds a v6conn to the pinger to enable sending pings to v6
addrs.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Joe Tsai